Branding/Logomark minus Citation Combined Shape Icon/Bookmark-empty Icon/Copy Icon/Collection Icon/Close Copy 7 no author result Created with Sketch. Icon/Back Created with Sketch. Match!
  • References (7)
  • Citations (1)
Cite
References7
Newest
Published on Apr 12, 2011
Saghi Saedlou2
Estimated H-index: 2
(ArcelorMittal),
Pierre Santacreu2
Estimated H-index: 2
(ArcelorMittal),
Johan Leseux2
Estimated H-index: 2
(ArcelorMittal)
2 Citations Source Cite
Published on Apr 12, 2011
Pierre Santacreu2
Estimated H-index: 2
(ArcelorMittal),
Saghi Saedlou2
Estimated H-index: 2
(ArcelorMittal)
+ 2 AuthorsJohan Leseux2
Estimated H-index: 2
(ArcelorMittal)
12 Citations Source Cite
Published on Dec 1, 2006in Corrosion Science 6.36
Marie-Laure Doche11
Estimated H-index: 11
(UFC: University of Franche-Comté),
Jean-Yves Hihn20
Estimated H-index: 20
(UFC: University of Franche-Comté)
+ 3 AuthorsX. Roizard2
Estimated H-index: 2
Cycling corrosion tests have been performed to simulate corrosion conditions in the cold end of an automotive exhaust system. A middle range 1.4512 (AISI 409) stainless steel is submitted to a conventional dip dry test (DDT) parallel to a similar test but including an additional external stress thanks to an ultrasonic transducer. This new ultrasonic test (so called UST) is expected to reduce the diagnostic time of the corrosion test by the combined action of the chemical corrosion process and of...
17 Citations Source Cite
Seung Uk Lee2
Estimated H-index: 2
(Hanyang University),
Jae Chen Ahn1
Estimated H-index: 1
(Hanyang University)
+ 2 AuthorsKyung Sub Lee29
Estimated H-index: 29
(Hanyang University)
Abstract The influence of Cl − (919 ppm) and a mixture of Cl − (919 ppm) and Br − (51 ppm) on the corrosion behavior of 15%Cr ferritic stainless steel was investigated. Potentiodynamic and immersion tests were performed to examine the corrosion behavior. The size and the shape of pits were observed by optical microscope and scanning electron microscope. The oxide films formed on stainless steel were investigated by X-ray photoelectron spectroscopy (XPS). During the immersion test at 93 °C for 60...
14 Citations Source Cite
Published on Mar 5, 2001
Junichiro Hirasawa2
Estimated H-index: 2
(Kawasaki Steel Corporation),
Takumi Ujiro4
Estimated H-index: 4
(Kawasaki Steel Corporation)
+ 1 AuthorsOsamu Furukimi7
Estimated H-index: 7
(Kawasaki Steel Corporation)
2 Citations Source Cite
Published on Jan 1, 1991in Isij International 1.43
Toshio Shibata23
Estimated H-index: 23
(Osaka University)
Recent advances in the field of corrosion failure evaluation by the extreme value statistics have been reviewed. Historical background of the extreme value statistics, and recent developments in the theory and application to corrosion are described. The extreme value distribution contains three asymptotic distributions which are derived from the initial distributions, but the first type for the maximum value, i.e., the Gumbel distribution and the third type for the minimum value, i.e., the Weibu...
29 Citations Source Cite
Published on Jul 22, 1949
Harry Press1
Estimated H-index: 1
From Introduction: "Recent developments in the statistical theory of extreme values (references 4 to 10) have indicated a somewhat more rational approach to the problem of predicting the probability of occurrence The present report summarizes some of these findings, indicates the method of application, and evaluates their applicability to certain gust-load problems ."
11 Citations